Cleaning Gas, Diesel or Furnace Oil on Water

1. Blend Micro 50^TM with warm water 3:1 (Water:Micro50^TM)
2. Spray on rainbow floating on water
3. Notice rainbow immediately disappears

Cleaning Grease and fuel grime on equipment ie: fuel pumps, tractors, farm equipment etc.

1. Blend Micro 50^TM 3:1 with warm water
2. Spray on equipment you wish to clean grease from
3. Wipe off after letting stand for 30 seconds

Cleaning motor oil stains on concrete

1. Blend Micro 50^TM 3:1 with warm water
2. Spray on stain on concrete
   Note: motor oil stains have dirt on top and product cleans oil from dirt but dirt needs to be washed off or nothing visible will happen
3. Wash stain with rag and you will notice it seems like mud and will smear concrete
4. Wash concrete until smear is gone
5. Re-apply blend of Micro 50^TM to concrete surface
6. Scrub with brush or broom
7. Wash with power washer or hose if possible after at least one hour or let sit indefinitely
8. Motor Oil stains are quite muddy and require some effort to remove and will not disappear like lighter hydrocarbons will

Cleaning Soot from oil furnace in carpet or fabric:

1. Blend Micro 50^TM 5:1 with warm water
2. Spray on carpet and work around with wet cloth
3. Once black marks are reduced to slight darkened area on carpet, squeeze water out of clean sponge onto carpet and reabsorb from carpet and all black stain will be lifted from the material. Rinse sponse and repeat until completely clean.

Cleaning Soot from oil furnace on concrete:

1. Blend Micro 50^TM 5:1 with warm water
2. Spray onto concrete area effected by stain
3. Work area with brush
4. Wash out with water until clean

Cleaning Furnace oil, diesel and gasoline stains and spills in concrete, asphalt, brick, siding etc.

1. Blend Micro 50^TM 4:1 with warm water
2. Spray on surface and scrub with brush/broom till lather develops
3. Let sit indefinitely if in someone's house ie: basement and the stain will go away over time
4. Power wash or wash with hose if outside after letting sit for at least one hour

Cleaning Furnace oil in the ground and on grass:

1. Blend Micro 50^TM 3:1 with warm water – use equal volume of concentrate to spill
2. Pour mixture on ground
3. Let sit indefinitely